|
| AQA-250 | The Aquila Swept RF Receiver is capable of covering up to a six foot (182.9 cm) opening using labels with two antennas (RX/TX). Additional antennas may be added for wider openings. Painted tubular frame antenna with acrylic center panel State of the art surface mount electronics and digital signal processor (DSP) provide unsurpassed reliability and performance. |
| AQA-350 | The Aquila Swept RF Transmitter is capable of covering up to a six foot (182.9 cm) opening using labels with two antennas (RX/TX). Additional antennas may be added for wider openings. Painted tubular frame antenna with acrylic center panel. State of the art surface mount electronics provide unsurpassed reliability and performance. |
| VLA-100 | The Vela Swept RF Receiver is capable of covering up to a 5.5 foot (167.6 cm) opening using labels with two antennas (RX/TX). Additional antennas may be added for wider openings. Stylish clear acrylic plastic antenna. State of the art surface mount electronics and digital signal processor (DSP) provide unsurpassed reliability and performance. |
| VLA-202 | The Vela Swept RF Transmitter is capable of covering up to a 5.5 foot (167.6 cm) opening using labels with two antennas (RX/TX). Additional antennas may be added for wider openings. Stylish clear acrylic plastic antenna. State of the art surface mount electronics provide unsurpassed reliability and performance. |
| STC617-P1 | The Defender 8.2 / 9.5 MHz RF system package is designed for easy Plug-n-Play installation. It includes both the transmitter and receiver pedestals, a non-slip aluminum mounting plate, power supply for 120 VAC operation and all necessary hardware for assembly. Assembles in minutes following easy step by step instructions. |
| STC617-P2 | The Defender 8.2 / 9.5 MHz RF system package is designed for easy Plug-n-Play installation. It includes both the transmitter and receiver pedestals, a non-slip aluminum mounting plate, power supply for 120 VAC operation and all necessary hardware for assembly. Assembles in minutes following easy step by step instructions. |
| STC618-P1 | The MultiTag 8.2 / 9.5 MHz RF system package is designed for easy Plug-n-Play installation. It includes both the transmitter and receiver pedestals, a non-slip aluminum mounting plate, power supply for 120 VAC operation and all necessary hardware for assembly. Assembles in minutes following easy step by step instructions. *Order STC618-P2 Package for 230-250 VAC. |
| STC626 | Defender transmitter antenna is the companion to the Defender receiver pedestal and uses SenTech's latest Swept RF transmitter PCB which operates at the frequency of 8.2 or 9.5 MHz. |
| STC625 | Defender receiver antenna* is capable of covering 3 - 5 foot aisle widths depending upon the type of tag or labels used. Wider aisles require additional pedestals. It uses SenTech's latest Swept RF receiver PCB which operates at the frequency of 8.2 or 9.5 MHz. Includes internal audible and visual alarms. |
| STC1990 | Single Antenna 1.990 MHz system, MTII Pedestal Design, operates on 120VAC or 220-250 VAC. Detects 3-4 feet equally on both sides of the antenna. One antenna will cover up to 6 foot door opening, when placed in the center, or a 3 foot door when placed to one side. Two antennas will covera 12 foot opening. Uses only hard tags - no labels |
| STC2000 | Single antenna 1.990 MHz system operates on 120 VAC or 220-250 VAC. Detects 3-4 feet equally on both sides of the antenna. One antenna will cover up to a 6 foot door when placed in center, or 3 foot door when placed at one side. Two antennas will cover a 12 foot opening. Easy installation. * Uses only hard tags (no labels) * 3.25 MHz and other frequencies available |
| STC2000-P1 | SenTech Solo system package, operates on 120 VAC, includes the following: 1 - Solo system 1.990 MHz (STC2000) 1 - 120V/12VAC transformer 500 - Black Omni plastic hard tags (STC2001) 500 - Flat head grooved tacks (STC210) 1 - Detacher (STC500) Installation and User Manuals |
| STC460 | Single antenna system operates on 120 VAC or 220-250 VAC. Detects hard tags 3-4 feet, labels 2-3 feet equally on both sides of the antenna. One antenna will cover up to a 6 foot door when placed in center, or 3 foot door when placed at one side. Two antennas will cover a 12 foot opening (hard tags). Easy installation. |
| STC4601 | Single antenna 4.6 MHz system operates on 120 VAC or 220-250 VAC. Detects 3-4 feet equally on both sides of the antenna. One antenna will cover up to a 6 foot door when placed in center, or 3 foot door when placed at one side. Two antennas will cover a 12 foot opening. Easy installation. * Uses only hard tags (no labels) * 1.990 MHz and other frequencies available |
| STC4601-P1 | Single antenna 4.6 MHz system operates on 120 VAC or 220-250 VAC. Detects 3-4 feet equally on both sides of the antenna. One antenna will cover up to a 6 foot door when placed in center, or 3 foot door when placed at one side. Two antennas will cover a 12 foot opening. Easy installation. * Uses only hard tags (no labels) * 1.990 MHz and other frequencies available |
| STC636 | MultiTag® transmitter antenna is the companion to the MultiTag II receiver pedestal and uses SenTech's latest Swept RF transmitter PCB which operates at the frequency of 8.2 or 9.5 MHz. |
| STC636-XD | MultiTag® Dummy transmitter antenna may be installed at and entrance to visually deter theft. Antenna is fully wired to accept an Electronic circuit board which may be added at a later date to make the system fully funtional. |
| STC700-22 | Allows easy end user installation of single aisle SenTech systems at 36 inch system centerline dimensions. Aluminum base plate is covered with black ez-clean non-slip vinyl material and comes pre-wired with plun-in connectors. Simply bolt pedestals to plate and plug into an AC outlet. |
| STC702-22 | Allows easy end user installation of single aisle or dual aisle SenTech systems at 36 or 72 inch system centerline dimensions. Aluminum base plate is covered with black ez-clean non-slip vinyl material and comes pre-wired with plun-in connectors. Simply bolt pedestals to plate and plug into an AC outlet. |
| STC635 | MultiTag® receiver antenna* is capable of covering 3 - 5.5 foot aisle widths depending upon the type of tag or labels used. Wider aisles require additional pedestals. It uses SenTech's latest Swept RF receiver PCB which operates at the frequency of 8.2 or 9.5 MHz. Includes internal audible and visual alarms. |
| STC635-RD | MultiTag® Dummy receiver antenna may be installed at and entrance to visually deter theft. Antenna is fully wired to accept an Electronic circuit board which may be added at a later date to make the system fully funtional. |
| STC2002-01 | Large diameter 1.75” (45 mm) round dome shaped plastic head tack with hardened .75" (19 mm) 3 groove steel pin, may be used with most RF hard tags that are 1.8" (46 mm) or larger in diameter. Provides an increased level of security from tampering. |
| STC2001 | Black 1.990 MHz Solo tag, has a high security 3 ball clutch lock for superior tack holding power. The Solo tag gives maximum detection in any 1.990 MHz RF system. *Also compatible with Knogo® swept RF systems. Measures 2.75” X 2.275” (70 X 58 mm), Weight each .624 oz. (17.8 g) |
| STC2002 | Light Gray color 1.990 MHz NoGo tag is designed for optimum performance in SenTech's Solo system. It has a high security 3 ball clutch lock for superior tack holding power. The NoGo tag gives maximum detection in any 1.990 - 2.0 MHz RF system. 100% Compatible with Knogo® swept RF and Pulsed RF systems. |
| STC2003 | Custom printed clear vinyl pouch with embedded RF tag circuit. High detection comparable to Omni tag. May be attached using a Prolock clutch and tack or may be concealed inside pockets or wallets and purses. * Any other RF or Magnetic frequencies available special order. |
| STC2199 | Custom white vinyl heat sealed pouch with embedded RF tag circuit. High detection comparable to Omni tag. May be attached using a Prolock clutch and tack, or may be concealed inside pockets or wallets and purses. * Any other RF or Magnetic frequencies available special order. |
| STC2004 | The Bottle Tag is made of black ABS plastic and works with any 8.2 MHz system. It has a machined brass high security lock and PVC coated steel cable. It is used to secure liquor bottles or other items that the lanyard may be pulled tight around and is removed by standard magnetic detachers. |
| STC2008 | Optical Safer Versatile is compatible with all Radio Frequency (RF) 8.2 MHz EAS systems. Protects eye glasses by attaching to one arm. May only be removed by using and electric or manual shuttle detacher. |
| STC2012-82 | The Pull-Lok Tag is made of black ABS plastic and works with any 8.2 MHz system. It has a machined brass high security lock and PVC coated steel cable. It is used to secure large diameter items up to 4.5” Dia. that the lanyard may be pulled tight around and is removed by standard magnetic detachers. |
| STC1050 | The SenTech Black Mini tag is small in size and designed for optimum performance in any 8.2 MHz system. It has a high security 3 ball clutch lock for superior tack holding power. The Mini tag is 100% Compatible with all 8.2 MHz swept RF and Pulsed RF systems. |
| STC301-01 | Light Gray color Omni tag is has a high security 3 ball clutch lock for superior tack holding power. The Omni tag gives maximum detection in any 8.2 MHz RF system. Measures 2.75” X 2.275” (70 X 58 mm) Weight each .624 oz. (17.8 g) |
| STC8002 | NoGo 8.2 MHz tag is white in color and has a high security 3 ball clutch lock for superior tack holding power. The NoGo tag gives maximum detection in any 8.2 MHz RF system. 100% Compatible with Knogo® swept RF and Pulsed RF systems and detachers. |
| STC2012-95 | The Pull-Lok Tag is made of charcoal gray ABS plastic and works with any 9.5 MHz system. It has a machined brass high security lock and PVC coated steel cable. It is used to secure large diameter items up to 4.5” Dia. that the lanyard may be pulled tight around and is removed by standard magnetic detachers. |
| STC1801 | Light Gray color 1.81 MHz tag is designed for optimum performance in SenTech's 1.81 MHz Solo system. It has a high security 3 ball clutch lock for superior tack holding power. The NoGo tag gives maximum detection in any 1.81 MHz RF system. 100% Compatible with Checkpoint® and other Pulsed RF systems. |
| STC4600 | The 4.6 MHz Omni tag is optimized for use in 4.6 MHz pulsed RF systems. It has a high security 3 ball clutch lock for superior tack holding power. The Omni tag gives maximum detection in any 4.6 MHz RF system. Measures 2.75” X 2.275” (70 X 58 mm) Weight each .624 oz. (17.8 g) |
| STC1050-F | SenTech 8.2 MHz Ferrite is extremely light weight and is compatible with all 8.2 MHz systems. Utilizes a high security 3 ball magnetic clutch lock. May be removed by SenTech standard magnetic detachers. Length 2-1/4” (55 mm) Weight each .28 oz (10.4 grams) |
| KG450-M | Teal Blue in color is has a high security 2 ball clutch lock. Works with all standard pins and magnetic systems. |
| SC3020 | Hardened 9/16" steel pin, may be used with any RF hard tag, has large diameter dome shaped head for increased security. Has grooved shaft for increased holding power. |
| STC210 | Hardened 5/8" flat head steel pin, may be used with any RF hard tag. Has grooved shaft for increased holding power. |
| STC212 | Hardened 5/8" steel pin, may be used with any RF hard tag, has large diameter cone shaped head for increased security. Has grooved shaft for increased holding power. |
| STC211 | Hardened 9/16" flat head steel, smooth shaft pin, may be used with any RF hard tag. |
| STC375 | Hardened 3/4" (19mm) long fixed flat head, nickel finish, may be used with any RF hard tag. Has longer shaft for thicker garments and is grooved for increased holding power. |
| STC3021 | FlexTack is a high security 1 1/4 inch flexible steel tack, used to attach ball clutch type plastic hard tags to shoes or other items that have small eyelet holes. FlexTack has a 1/2 inch diameter steel head crimped on a flexible steel cable. Compatible with all ball clutch type hard tags from any manufacturer. |
| STC3021-01 | FlexTack is a high security 1 inch flexible steel tack, used to attach ball clutch type plastic hard tags to shoes or other items that have small eyelet holes. FlexTack has a 1/2 inch diameter steel head crimped on a flexible steel cable. Compatible with all ball clutch type hard tags from any manufacturer. |
| STC2004-AM | The Bottle Tag is made of black ABS plastic and works with any 58 khz. acousto magnetic system. It has a machined brass high security lock and PVC coated steel cable. It is used to secure liquor bottles or other items that the lanyard may be pulled tight around and is removed by standard magnetic detachers. |
| STC1100-2 | SenTech UltraTag® is compatible with Sensormatic UltraMax® systems and may be removed with standard Sensormatic Hand Detachers or Power Detachers, as well as the SenTech STC540 Hand Detacher. |
| STC1100-2A | SenTech UltraTag® is compatible with Sensormatic UltraMax® systems and may be removed with standard Sensormatic Hand Detachers or Power Detachers. Shipped in bags of 100. Includes 100 STC200X Tacks. Measures 3.25” X 1.1” (82.5 X 27.94 mm) Weight each .416 oz. (11.8 g) |
| STC1100-2C | SenTech UltraTag® is compatible with Sensormatic UltraMax® systems and may be removed with standard Sensormatic Hand Detachers or Power Detachers. Shipped in boxes of 1000 Includes 1000 STC200X Tacks. Measures 3.25” X 1.1” (82.5 X 27.94 mm) Weight each .416 oz. (11.8 g) |
| STC1100-3 | SenTech UltraTag® III is extremely light weight and is compatible with all Sensormatic UltraMax® systems. Utilizes a high security 3 ball magnetic clutch lock. May be removed by SenTech standard magnetic detachers. Length 1.8” (45.7 mm) Weight each .25 oz. (7 g) |
| STC1109 | SenTech’s UltraLanyard is a “one piece” tag lanyard combination that saves time during application and removal. It’s compatible with Sensormatic UltraMax® systems and may be removed with standard hand or power detachers. Its innovative design incorporates a high security black plastic lanyard that allows adjustable diameter from 1/2” to 2.5". It may be attached to items that have handles such as tools, sporting goods, luggage, handbags, etc. |
| ZL300-GNP | Tag, Acousto-magnetic, Supertag II grey, w pin mj200-g, 1k per box |
| SC3205 | Supertag used with all Sensormatic Ultramax Systems. Tag can be attached to merchandise with a supertag pin, wire lanyards. This tag can be removed using Sensormatic Supertag power detachers, or with the manual Supertag Hand Detacher. |
| STC1103 | Custom printed plastic laminated pouch tag used with Sensormatic® UltraMax® systems. Attached with price tag fasteners or clutch locks. May be printed with any store logo or colors. Also available printed with dummy barcode. |
| STC1104 | Laminated DR label tag printed with dummy barcode used with Sensormatic® UltraMax® systems. Attached with price tag fasteners or clutch locks. |
| STC2011 | Optical Safer Versatile is compatible with all Sensormatic® 58 KHz Acousto-Magnetic EAS systems. Protects eye glasses by attaching to one arm. May only be removed by using an electric or manual shuttle detacher. |
| SC3002 | Sensormatic® MicroGator® is used with Sensormatic 900 MHz microwave systems. They are removed with Sensormatic standard Hand Detachers or Power Detachers. SenTech offers new and refurbished Sensormatic detachers, as well as our new STC540 Hand Detacher. |
| SC3017X | Plastic laminated tag used with Sensormatic® Microwave systems. May be attached using swift-tach fasteners or magnetic clutch lock and a pin. It also may be placed in wallets or other places where a fastener is not practical. |
| SC3206 | Sensormatic compatible SuperTag® tack, Gray or Black plastic head with 9/16" hardened stainless steel pin, used with Sensormatic® SuperTag®. Also compatible with many other tags. |
| STC200X | Hardened stainless steel pin 9/16” length with white plastic head, also known as the "Alligator Tack" used with SenTech UltraTags, Sensormatic® UltraGator®, Alligator®, and MicroGator® Tags |
| STC215 | Hardened stainless steel pin .700” length with clear polycarbonate plastic head. Slightly longer than standard tacks allowing it to be used with thicker items like shoes, coats, carpets, etc.. May be used with any standard tags. |
| STC3018 | High security 6" PVC coated galvanized steel lanyard, used to attach any plastic hard tag to items that have handles or are irregular shaped such as luggage, handbags, sporting goods, etc. * Also available in 8 and 9 inch length. |
| STC3019 | P-Clip, used to protect a variety of items such as sun glasses, golf clubs etc. May be used to attach any manufacturers hard tag. Shown with Mini RF tag for illustration purpose only. May be used with any hard tag. |
| STC3018-01 | High security 8" PVC coated galvanized steel lanyard, used to attach any plastic hard tag to items that have handles or are irregular shaped such as luggage, handbags, sporting goods, etc. * Also available in 6 and 9 inch length. |
| STC3018-02 | High security 9" PVC coated galvanized steel lanyard, used to attach any plastic hard tag to items that have handles or are irregular shaped such as luggage, handbags, sporting goods, etc. * Also available in 6 and 8 inch length. |
| STC3020 | High security black plastic lanyard, adjustable length from dia 1/8" to 1.75" used to attach any plastic hard tag to items that have handles or are irregular shaped such as luggage, handbags, sporting goods, tools etc. |
| STC3020-9 | High security black plastic lanyard, adjustable length from dia 1/8" to 3.75" used to attach any plastic hard tag to items that have handles or are irregular shaped such as luggage, handbags, sporting goods, tools etc. |
| STC1405 | SenTech Mini InkPro is manufactured using the highest quality materials including glass vials, hardened 4 groove stainless steel pin, and ultraviolet resistant plastic. Printed text with graphic illustrations warn against unauthorized removal. The InkPro Mini is compatible with all standard industry tags, clutches, MicroClamps and detachers. |
| STC1400 | SenTech InkPro is manufactured using the highest quality materials including glass vials, hardened stainless steel pin, and ultraviolet resistant plastic. Printed text with graphic illustrations warns against unauthorized removal. The InkPro is compatible with all standard industry tags, clutches, MicroClamps and detachers. |
| STC1401 | The Pro-Lok is a high quality magnetic clutch lock used with ink tags. It Incorporates a high security three ball clutch lock for superior holding power that securely locks ink tags to items preventing unautorized removal. The Pro-Lok is compatible most standard ink tags and detachers. |
| SC3003 | Sensormatic® Micro Clamps do not alarm any systems and are used for attaching ink tags to garments. They are removed with standard Sensormatic Hand Detachers or Power Detachers. SenTech offers new and refurbished Sensormatic detachers. |
| STC511 | Hand held magnetic detacher designed to remove all industry standard tags and ink tag clutches. Made of high quality materials with black plastic hand grip, and 30” lanyard for securing to a sales counter. Dimensions 1.25” O.D. x 4.00” long |
| STC505 | Table top magnetic detacher, designed to remove Sensormatic® InkTag III's, will also remove all industry standard tags and ink tag clutches. Made of solid aluminum with black hard coat finish. |
| STC500 | Low cost surface mounted magnetic detacher designed to remove all industry standard tags and ink tag clutches. Made of solid aluminum with black hard coat finish. Includes mounting hardware. |
| STC501 | Surface mounted magnetic detacher designed to remove all industry standard tags and ink tag clutches. Made of solid aluminum with black hard coat finish. Includes anti-theft slip ring and mounting hardware. |
| STC502 | Table top magnetic detacher designed to remove all industry standard tags and ink tag clutches. Made of solid aluminum with black hard coat finish. Optional lock available |
| STC506 | Surface mounted magnetic detacher designed to remove Sensormatic® InkTag III's, will also to remove all industry standard tags and ink tag clutches. Made of solid aluminum with black hard coat finish. |
| STC310 | SenTech detacher lock prevents unauthorized removal of tags. It is securely held in place by the magnetic field of the detacher and can be easily removed by a special key. The lock kit includes a lock, key and a colored wristband key chain. |
| STC508 | This manual detacher is used to remove the MW Security Versatile Optical Safer. |
| STC540 | SenTech Hand Detacher (non-power) removes SenTech's UltraTag® and all standard Sensormatic® Alligator®, MicroGator®, UltraGator® and MicroClamp tags. • Improved design requires up to 40 percent less force than other detachers. • Easily removes tags that are damaged or difficult to detach. |
| SC3027-01 | SuperTag® Detacher - 120 VAC powered, removes Sensormatic® SuperTag® |
| STC540-R | SenTech’s innovative Retractor has a heavy gauge plastic coated steel cable that securely attaches the tag detacher to the point of sale counter. It allows the detacher to be pulled out up to ten feet away from its mounting point to easily remove tags from large items that cannot be put on the checkout counter such as barbeque grills, generators, pressure washers, tools etc. Detacher cable automatically retracts back into its housing when not in use. This version comes complete with SenTech’s Hand Detacher as shown.
Retractor mechanism may be purchased separately and used to secure merchandise on display or retrofitted to any existing hand operated, magnetic or SuperTag detacher. • Detacher extends out up to 10 Feet from mounting point |
| STC550 | SenTech’s innovative Retractor (WITHOUT DETACHER) has a heavy gauge plastic coated steel cable that securely attaches the tag detacher to the point of sale counter. It allows the detacher to be pulled out up to ten feet away from its mounting point to easily remove tags from large items that cannot be put on the checkout counter such as barbeque grills, generators, pressure washers, tools etc. Detacher cable automatically retracts back into its housing when not in use. This version does not include a detacher.
Retractor mechanism may be purchased separately and used to secure merchandise on display or retrofitted to any existing hand operated, magnetic or SuperTag detacher. May also be used as a Tool Retractor, or Tool Balancer. • Cable extends out up to 10 Feet from mounting point |
| STC550-5 | SenTech’s Merchandising Retractor is specially designed to protect valuable display merchandise while allowing a retail store's customers to pick up and hold power tools, nail guns, electronic equipment, handbags, etc. These items are usually bolted, tied or strapped down to wall or shelf displays preventing the customer from holding and looking at the item, reducing sales. It may be attached in a virtually unlimited number of ways to almost any item. SenTech engineering staff will provide assistance or custom design components if necessary to facilitate attachment to items.
Benefits: • Prevents theft of items on display Additional Uses: • Tool Retractor, or Tool Balancer |
| SC3014 | Sensormatic® Hand Detacher (non-power) removes SenTech's UltraTag® and all standard Sensormatic® Alligator®, MicroGator®, UltraGator® and MicroClamp tags. |
| SC3024 | 120 VAC powered, removes SenTech's UltraTag® and all standard Sensormatic® Alligator®, MicroGator®, UltraGator® and MicroClamp tags. |
| SC3024-01 | 120 VAC powered, removes SenTech's UltraTag® and all standard Sensormatic® Alligator®, MicroGator®, UltraGator® and MicroClamp tags. |
| MK225 | Manual (non power), # AMD-3040 removes Sensormatic Supertags. |
| SC3026 | Manual (non-power) removes Sensormatic® SuperTag® |
| SC3027 | 120 VAC powered, removes Sensormatic® SuperTag® |
| CP332-ND | Non-Deactivatable 10 MHz plain white label for use in libraries. Compatible with all 10 MHz RF systems labels. May be printed in standard label printers. Measures 1.5” (40 mm) square and is rolled in quantities of 500 per roll. |
| CP316 | Non-Deactivatable 8.2 MHz video flap label is placed on the edge of the the VHS video tape or under the flap. It is compatible with all SenTech 8.2 MHz RF systems as well as any competitive 8.2 MHz RF systems using labels. Measures 5.5” X 11/16” (14 cm X 1.75 cm) and is rolled in quantities of 500 per roll. |
| SL482B-1K | 8.2 MHz barcoded label compatible with all SenTech 8.2 MHz RF systems as well as any competitive 8.2 MHz RF systems using labels. Measures 1.5” (40 mm) square. |
| SL482BD | Deactivatable 8.2 MHz barcoded label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. Measures 1.5” (40 mm) square. |
| SL482BND | Non-Deactivatable 8.2 MHz Barcode label compatible with all SenTech 8.2 MHz RF systems, and any competitive 8.2 MHz RF systems using labels. Measures 1.6” (40.64 mm) square. |
| SL482DN | Deactivatable 8.2 MHz Nude label designed for source tagging. Has adhesive on one side and no paper. Compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. Measures 1.6” (40.64 mm) square. |
| SL482PD | Deactivatable 8.2 MHz Plain white label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. May be printed in standard label printers. Measures 1.6” (40.64 mm) square. |
| SL482PD-ST4K | Paper thin Deactivatable 8.2 MHz Plain white labels designed for high speed production line auto application. Compatible with all 8.2 MHz RF systems and deactivators. Each roll contains 4000 labels. Measures 1.6” (40.64 mm) square. Contact SenTech for detailed specifications. |
| SL482PD-ST8K | Paper thin Deactivatable 8.2 MHz Plain white labels designed for high speed production line auto application. Compatible with all 8.2 MHz RF systems and deactivators. Each roll contains 4000 labels. Measures 1.6” (40.64 mm) square. Contact SenTech for detailed specifications. |
| SL582BD | Deactivatable 8.2 MHz barcoded label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. Measures 2.050” X 1.90" (52 X 48 mm) and is rolled in quantities of 2000 per roll. |
| SL582P | Non-Deactivatable 8.2 MHz Plain white label compatible with all SenTech 8.2 MHz RF systems using labels. May be printed in standard label printers. Measures 2.050” X 1.90" (52 X 48 mm) and is rolled in quantities of 2000 per roll. |
| SL582PD | Deactivatable 8.2 MHz Plain white label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. May be printed in standard label printers. Measures 2.050” X 1.90" (52 X 48 mm) and is rolled in quantities of 2000 per roll. |
| SL682PD | Deactivatable 8.2 MHz Plain white label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. May be printed in standard label printers. Measures 1.2” x 2” (30 x 40 mm). |
| SL782BD | Deactivatable 8.2 MHz barcoded label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. Measures 1.5” (40 mm) X 1.35” (34.3 mm). |
| SL782PD | Deactivatable 8.2 MHz plain label compatible with all SenTech 8.2 MHz RF systems and deactivators as well as any competitive 8.2 MHz RF systems using labels. Measures 1.5” (40 mm) X 1.35” (34.3 mm). |
| CP314 | Non-Deactivatable 9.5 MHz video flap label is placed on the edge of the the VHS video tape or under the flap. It is compatible with all SenTech 9.5 MHz RF systems as well as any competitive 9.5 MHz RF systems using labels. Measures 5.5” X 11/16” (14 cm X 1.75 cm) and is rolled in quantities of 500 per roll. |
| SL495BK | Non-Deactivatable 9.5 MHz label printed for use in video stores with “Be Kind Please Rewind” is compatible with all SenTech 9.5 MHz RF systems as well as any competitive 9.5 MHz RF systems using labels. Measures 1.5” (40 mm) square and is rolled in quantities of 1000 per roll. |
| SL495P | Non-Deactivatable 9.5 MHz label may printed for use in video stores is compatible with all SenTech 9.5 MHz RF systems as well as any competitive 9.5 MHz RF systems using labels. Measures 1.5” (40 mm) square and is rolled in quantities of 1000 per roll. |
| SL595P | Non-Deactivatable 9.5 MHz Plain white label compatible with all SenTech 9.5 MHz RF systems as well as any competitive 9.5 MHz RF systems using labels. May be printed in standard label printers. Measures 2.050” X 1.90" (52 X 48 mm) and is rolled in quantities of 2000 per roll. |
| STC650 | Permanently deactivates all deactivatable 8.2 MHz RF labels from any manufacturer. Solid mechanical design and proven electronics give years of maintenance free operation. Will not interfere with nearby systems or other deactivators. Provides audible beep if labels are not deactivated. Operates on 100-120 VAC 50/60 Hz. Easy installation, just place on the counter in a suitable location near the point of sale and plug it in. |
| STC660 | High Performance RF label deactivator. Will permanently deactivate any deactivatable 8.2 MHz RF labels up to 12 inches from antenna. Operates on 120 VAC, 60 Hz Four standard modes of operation. 1 - Normal Mode - Audible beep before deactivation 2 - Extended Range with beep - beeps only if label is not deactivated 3 - Extended Range - silent operation (no beep) 4 - Double Checker (tag detection only - beeps when sensing tags) Internal beeper and LED power indicator. Includes fully assembled deactivator pad and power supply. |
| STC662 | SenTech’s High Performance RF label deactivator will deactivate any deactivatable 8.2 MHz RF labels up to 12 inches from deactivation antenna. Can operate at any two of five different frequencies simultaneously. Available Frequencies: 1.81, 1.99, 3.25, 4.6, and 8.2 MHz. Also has four different modes of operation. 1 - Audible Beep before deactivation 2 - High Power - beeps only if label is not deactivated 3 - High Power - no beep 4 - Double Checker (tag detection only - beeps when sensing tags) Internal beeper and multi-function LED power/status indicator. Includes separate deactivator pad and power supply. |
| STC655 | The under counter mount is used to easily install the following SenTech RF label deactivators under a non-metallic counter. Includes all necessary mounting hardware. STC650, STC651, STC660 |
| STC662-P | Optional or replacement pad used with SenTech’s High Performance RF label deactivator. Exremely durable pad will deactivate any deactivatable 8.2 MHz RF labels up to 12 inches from pad. Made of solid high impact ABS plastic with non-slip rubber bottom surface. Measures 12” x 12” and only 7/16” high. |
| ZLDRS1 | Sensormatic's 58 KHz Ultra•Max® Ultra•Strip® adhesive EAS labels are deactivatable offered in plain white, barcode, black. They may be used with any 58 KHz Sensormatic UltarMax® acousto-magnetic system and deactivators. |
| ZLDRS2 | Sensormatic's Ultra•Max® Ultra•Strip® adhesive EAS labels are deactivatable offered in plain white, barcode, black. They may be used with any 58 KHz Sensormatic UltarMax® acousto-magnetic system and deactivators. |
| ZLDRS5 | Sensormatic's Ultra•Max® Ultra•Strip® adhesive EAS labels are deactivatable offered in plain white, barcode, black. They may be used with any 58 KHz Sensormatic UltarMax® acousto-magnetic system and deactivators. |
| ML06127-B | Non-Deactivatable magetic label used with any Sensormatic®, Knogo®, or campatible magnetic system. Label dimensions are 5” X 1/4” (127mm X 6mm) |
| ML0690-B | Non-Deactivatable magetic label used with any Sensormatic®, Knogo®, or campatible magnetic system. Label dimensions are 3.5” X 1/4” (90mm X 6mm) |
| ML0690-BC | Non-Deactivatable magetic label used with any Sensormatic®, Knogo®, or campatible magnetic system. Label dimensions are 3.5” X 1/4” (90mm X 6mm) |
| ML0690-C | Non-Deactivatable magetic label used with any Sensormatic®, Knogo®, or campatible magnetic system. Label dimensions are 3.5” X 1/4” (90mm X 6mm) |
| STC670 | Permanently deactivates upon contact any Acousto-Magnetic (AM) labels. Printed warning against placing credit cards on deactivator surface. |
| DVD100 | The SenTech DVD security case is designed to provide excellent security for DVD and CD rental applications. It secures the DVD or CD by locking it through the center hole. A magnetic super detacher is required to remove the locking tack. The DVD case is then passed around the security system allowing the renter to exit the store without alarming the system. Upon return the locking tack is inserted re-securing the DVD or CD. Patent Pending A sealed internal compartment protects the EAS tag circuit from being tampered with. |
| DVD400-82 | The SenTech DVD security case is designed to provide excellent security for DVD and CD rental applications. It secures the DVD or CD by locking it through the center hole. A magnetic super detacher is required to remove the locking tack. The DVD case is then passed around the security system allowing the renter to exit the store without alarming the system. Upon return the locking tack is inserted re-securing the DVD or CD. US Patent 6,896,133 A sealed internal compartment protects the EAS tag circuit from being tampered with. |
| DVD400-95 | The SenTech DVD security case is designed to provide excellent security for DVD and CD rental applications. It secures the DVD or CD by locking it through the center hole. A magnetic super detacher is required to remove the locking tack. The DVD case is then passed around the security system allowing the renter to exit the store without alarming the system. Upon return the locking tack is inserted re-securing the DVD or CD. US Patent 6,896,133 A sealed internal compartment protects the EAS tag circuit from being tampered with. |
| DVD400-M | The SenTech DVD security case is designed to provide excellent security for DVD and CD rental applications. It secures the DVD or CD by locking it through the center hole. A magnetic super detacher is required to remove the locking tack. The DVD case is then passed around the security system allowing the renter to exit the store without alarming the system. Upon return the locking tack is inserted re-securing the DVD or CD. US Patent 6,896,133 A sealed internal compartment protects the EAS tag circuit from being tampered with. |
| DVD400-AM | The SenTech DVD security case is designed to provide excellent security for DVD and CD rental applications. It secures the DVD or CD by locking it through the center hole. A magnetic super detacher is required to remove the locking tack. The DVD case is then passed around the security system allowing the renter to exit the store without alarming the system. Upon return the locking tack is inserted re-securing the DVD or CD. US Patent 6,896,133 A sealed internal compartment protects the EAS tag circuit from being tampered with. |
| DVD401 | Plastic head tack designed for use with the SenTech DVD100 security case. The plastic head is shaped to allow easy removal. It is made of light gray ABS plastic with a hardened stainless steel pin. The pin also has a one groove shaft providing a positive lock that is highly resistant to unauthorized removal. US Patent 6,896,133 |
| DVD201 | Plastic head tack designed for use with the SenTech DVD200 security case. The plastic head is shaped to allow easy removal. It is made of light gray ABS plastic with a hardened stainless steel pin. The pin also has a one groove shaft providing a positive lock that is highly resistant to unauthorized removal. US Patent 6,896,133 |
| DVD-300 | High security locking case for DVD sell thru applications. Case can be adapted for use with any RF, acousto-magnetic or electro-magnetic system by applying a security label inside for the respective eas system. Requires STC516 detacher for removal of DVD. |
| STC1450 | The Patented Retro-Clutch is a high quality magnetic clutch lock used to prevent unathorized removal of DVD and CD media from their case. It Incorporates a high security three ball clutch lock that securely locks through the center hole of DVD and CD media preventing unautorized removal. The Retro-Clutch is compatible with all SenTech DVD detachers and specific DVD and CD media security cases. Call SenTech for more Information. US Patent 6,896,133 |
| STC1450-01 | Steel dome head tack is designed for use with the SenTech STC1450 security case Retro-Clutch. The nickel plated hardened steel tack is dome shaped to provide high security against tampering and has a single groove shaft providing a positive lock that is highly resistant to unauthorized removal. US Patent 6,896,133 |
| CD-300 | High security locking case for CD sell thru applications. Case can be adapted for use with any RF, acousto-magnetic, or electrro magnetic system by applying a security label inside for the respective eas system. Requires STC516 magnetic detacher for removal of CD. |
| STC509 | Magnetic Super Detacher used to open the SenTech DVD100 case. Uses multiple extremely powerful rare earth magnets designed to release superlocks. No other standard magnetic detacher will open the DVD100 case. Detacher is mounted flush in a 2.5” diameter hole. |
| STC510 | Magnetic Super Detacher used to open the SenTech DVD100 case. Uses multiple extremely powerful rare earth magnets designed to release superlocks. No other standard magnetic detacher will open the DVD100 case. Detacher is placed on table top coiled lanyard may be secured with a screw to the counter. |
| STC515 | Magnetic Super Detacher used to open the SenTech DVD100 case. Uses multiple extremely powerful rare earth magnets designed to release superlocks. No other standard magnetic detacher will open the DVD100 case. Detacher may be surface mounted with 3 screws. |
| STC516 | Detacher, magnetic style for removing lock on DVD-300, and CD-300 sell thru cases. |
| DV8200 | The DV8200 Deactivation Verifier offers a simple way to determine if an RF label deactivator is functioning properly by vibrating to alert the user when it detects adequate signal strength required to deactivate a label. Compact design utilizes surface mount electronics for superior reliability. Simple push button operation with automatic power off. Uses one 9 volt Alkaline battery (included). An automatic battery monitoring circuit illuminates a yellow LED indicating a low battery condition. Durable light gray plastic case with easy access battery cover. Battery snaps into place without wires eliminating failure from broken wires. • Vibrates to indicate deactivator is functioning properly • Green Power indicator • Yellow Low Battery indicator • Compact size 4.4” x 2.55” x .9” (112 x 65 x 23 mm) • Easy access battery cover • 2 year limited warranty |
| STC311 | SenTech’s new hand verifier will detect tags and labels hidden in pockets or bags at a distance up to 12 inches (30 cm). Compact ergonomic design utilizes advanced surface mount electronics giving superior detection, and reliability. Simple push button operation with automatic power off. White Plastic Case with belt holder. Built-in audio alarm and vibrator signals tag detection. Low battery indicator. Weight 6 oz. (170 g). Uses one 9 volt Alkaline battery – included. May be set for the following alarm modes: Beep only Vibrate only Beep and Vibrate |
| STC346 | Security Detuner Cards to deactivate any radio frequency security tags, regardless of which system is being used. Cards are precision cut and printed to make them indistinguishable from cards made from standard card stock. Standard 3" x 5" grid style cards readily accept stamped date. Cards are printed on both sides for maximum usage. |
| STC347 | Standard size high back Library book pocket with adhesive back. |
| CD1020-VA | The CD1020-VA is a compact 420 TVL, 1/3” format Digital CCD Mini dome camera. Features Sony Super HAD Technology. Includes varifocal auto iris lens making it ideal for a large variety of applications. Operates on 12 VDC, works well in low light conditions at 0.2 LUX. |
| ED300 | The ED300's advanced digital signal processing provides users with the sharpest image possible. The dome also features a built-in varifocal lens for discreet surveillance or close-up viewing. See PDF spec sheet for more detailed information. |
| VCB-3454 | 1/3" CCD High Performance B/W Camera, 400 TV Lines, 0.05 Lux, BLC, Video or A/I Lens, Dual Power Operation (12V DC / 24V AC) |
| VCC-3954 | 330 TV Lines of Resolution. Standard Resolution, high performance color camera, 0.5 Lux @ F1.2. Dual power operation uses either 24VAC or 12VDC |
| VCC-4594 | Super high-resolution of 520 horizontal TV lines. Intelligent backlight compensation. High performance with minimum required illumination of 0.03 lux (F 1.2 lens in B/W mode). Digital signal processing (DSP) for sharper, clearer color images |
| VCC-6574A | Super High Resolution -- 520 TV Lines of Resolution • High Sensitivity of 0.9 lux @f1.2 Smart Multi-zone Weighted BLC • New DSP Circuitry, DC & Video Auto-iris lens compatibility |
| VCC-6584 | 520 TV Lines of Resolution. Super High Resolution, 0.5 Lux @ F1.2, 64 section BLC Dual power operation uses either 24VAC or 12VDC |
| VCC-WD8574 | 450TV Lines of Resolution • Day / Night wide dynamic range. Dual power operation uses either 24VAC or 12VDC |
| 13VG2812AS-SQ | Focal Length 2.8-12mm Iris Range F/1.4 to 360 Iris Operation Auto Iris (DC) w/ 4 pin square conn. Focus Operation Manual Mount CS |
| 13VG308AS-SQ | Focal Length 3-8mm Iris Range F/1.0 to 360 Iris Operation Auto Iris (DC) w/ 4 pin square conn. Focus Operation Manual Mount CS |
| 13VG550-SQ | 5-50mm, F/1.4 to 185, Auto Iris (DC) w/ 4 pin square conn., Manual focus, CS mount |
| SVCL-CS2812VA | 2.8-12mm Varifocal lens, F 1.4-360, Auto Iris DC 1/3” format, CS Mount |
| SVCL-CS308VA | 3.0-8mm Varifocal lens, F 1.0-360, Auto Iris DC 1/3” format, CS Mount |
| DSR-3506H160 | • An HDD recorder with a complete 6-ch multiplexer • A clear picture with horizontal resolution of 520 TV lines • Simultaneous recording and playback at 60 fields / sec • Live picture monitoring at 30 FPS • Remote monitoring with networking capability |
| DSR-3009H160 | Digital Video Recorder with Integrated 9-Channel Multiplexer 160GB Internal Capacity, Plug ’N’ Play External Expandability to 960GB, 60fps Digital Triplex Capability – Simultaneously Record, View Live, Internet Control, Audio Recording, Alarm/Motion Only Recording, Easy Search Capability, Motion Search on Playback, Time/Date Search, Alarm Search, Alarm Thumbnail Search, CompactFlashTM slot for removable media, LAN/WAN/Internet Control, Built-in Web Server – No Client Application, Browser-based Control with IE 5.0, Multi-view display over LAN or Internet, Simultaneous multi-user access over LAN or Internet, PCMCIA SCSI Card Option for DAT or CD-R/W Archiving |
| DSR-3709H160C | Digital Video Recorder with Integrated 9-Channel Multiplexer 160GB Internal Capacity, Lan/Wan Ready, CF Slot, Audio, with built in CD-R/RW Disk writing Unit |
| DSR-3016H320 | Digital Video Recorder with Integrated 16-Channel Multiplexer 320GB Internal Capacity, Plug ’N’ Play External Expandability to 960GB, 60fps Digital Triplex Capability – Simultaneously Record, View Live, Internet Control, Audio Recording, Alarm/Motion Only Recording, Easy Search Capability, Motion Search on Playback, Time/Date Search, Alarm Search, Alarm Thumbnail Search, CompactFlashTM slot for removable media, LAN/WAN/Internet Control, Built-in Web Server – No Client Application, Browser-based Control with IE 5.0, Multi-view display over LAN or Internet, Simultaneous multi-user access over LAN or Internet, PCMCIA SCSI Card Option for DAT or CD-R/W Archiving |
| PE-VS5104 | Low cost, desktop, sequential switcher. See product data sheet for complete information. |
| PIH-302 | Lightweight internal Pan & Tilt head for fully functional cameras. The AC motors are avialable in a wide range of voltages and provide 6 degree/second panning speed and 4 degree/second tilt. The pan range is 350 degree can be limited by setting the 2 externally adjustable end-stops; these also set the range when the Autopan function is enabled. The top mount head can be titled to 30 degree above horizontal and 40 degree below horizontal. Built in video cable management simplifies installation and improves reliability by providing a flexible curly cable connection to the back of the camera. This is then routed through the head and comes out as a BNC video output on the base, preventing video loss through repetitive cable strain. The body is constructed from injection moulded ABS and is protected from the environment by dust-proof seals. The base fixing has a single 1/4 inch UNC thread and can be mounted to a wall with the PIH-5003 wall bracket. To integrate with Li-Lin domes or matrix system use the PIH-820 Telemetry Receiver, or the PIH-302C for hardwire control. |
| PIH-308 | Provides full control of up to 5 PTZ's, via hardwire connections as opposed to telemetry control. The 5 main rocker switches control movement left/right and up/down along with zoom, focus and manual iris. There is also an adjustable control for altering the speed of the lens functions. A range of voltage options are avilable depending on the requirements of the pan & tilt, the lens power output is 8-16Vdc. Each lens and head are selected via a numbered push button, which then illuminates an LED. |
| PN-845246 | The Panavise unique component system allows you to build one of 12 different versions. • 2”, 4” or 6” overall length. • Knob or set screw adjustment. • Round or T-Bar clip mounting. • 120° tilt, and 360° camera rotation. |
| PN-845246W | The Panavise unique component system allows you to build one of 12 different versions. • 2”, 4” or 6” overall length. • Knob or set screw adjustment. • Round or T-Bar clip mounting. • 120° tilt, and 360° camera rotation. |
| 5604-0012 | Heavy duty desktop AC power transformer with IEC320 input connector, TUV/CE Approved Requires separate power input cable, SenTech part number 0650-0027. |
| 5604-0011 | High quality transformer with 10 foot round output cable AWG 20 x 2 Cond., 120 VAC/12 VAC @1Amp., 60 Hz. UL/CSA Listed. Used with SenTech Solo systems. |
| STC8200-P | Heavy duty wall mountable AC power supply. Includes a 18" long IEC320 power cable with 3 prong grounded plug. Output cable is 10 foot long, 18 AWG twisted pair with black PVC jacket, terminated with a 3 pin female Molex connector. 120 VAC - 18 VAC, 2.2 Amps. |
| 5604-0006 | Heavy duty wall AC power transformer with 3 prong grounded plug. Output has screw teminals for attaching cable. UL/CSA Listed |
| AX-ALTV244 | UL Listed power supply capable of powering up to four cameras. Has four Individually fused outputs with screw terminal connections. |
| ALTV248 | UL listed power supply capable of powering up to 8 cameras. Has eight individually fused outputs with screw terminal connections. |
| 0300-0014 | SenTech's latest Swept RF (SRF) receiver. State of the art surface mounted electronics, Digital Signal Processing (DSP) and advanced software combine to give years of trouble free operation. Used in current versions of SenTech's swept RF Defender, MultiTag II, and X'Aisle systems. |
| 0300-0015 | SenTech's latest Swept RF (SRF) transmitter. State of the art surface mounted electronics, and advanced software combine to give years of trouble free operation. Used in current versions of SenTech's swept RF Defender, MultiTag II, and X'Aisle systems. |
| 0300-0025 | The Solo transceiver PC board is used in all SenTech 1.81 MHz Solo single panel systems. It is a pulsed RF transceiver utilizing advanced surface mounted circuitry that is designed for simple plug-n-play installation and service by technicians or end users. The PCB continuously self adjusts itself to the store environment to provide maximum detection. |
| 0300-0023 | The Solo transceiver PC board is used in all SenTech 4.6 MHz Solo single panel systems. It is a pulsed RF transceiver utilizing advanced surface mounted circuitry that is designed for simple plug-n-play installation and service by technicians or end users. The PCB continuously self adjusts itself to the store environment to provide maximum detection. |
| 0300-0024 | Antenna matching circuit printed circuit board used in Aquila, and Vela systems. The matching circuit board is used to precisley balance match the pedestal antenna with the corresponding receiver or transmitter electronics in each antenna. |
| 0400-0021 | Black palstic chain that may be attached to EAS pedestals. It is used to direct customers through the EAS system preventing them from exiting or passing items around the system. This item is included in SenTech’s Chain Kits. |
| 2100-0068 | BNC male connector for RG59 cable, nickel plated with teflon insulator, 3 piece crimp style for CCTV camera installation. |
| 6000-0030 | Teflon jacketed coaxial high temperature cable RG59 with 18/2 gauge conductors. Superior quality CCTV installation cable. 1000 feet per spool. |
| 6000-0032 | Teflon jacketed coaxial high temperature cable RG59 with 18/2 gauge conductors. Superior quality CCTV installation cable. 500 feet per spool. |
| 6000-0036 | PVC jacketed coaxial cable RG59 with 18/2 gauge conductors. Superior quality CCTV installation cable. 500 feet per spool. |